WHY SHOULD I BUY A KO SUR-RON MOTOR?
The KO upgrade motor for the Sur-Ron has been designed from scratch by our engineering team to be the best Sur-Ron upgrade motor available. We have taken every aspect of what we think will give the most power, the best cooling and the best performance possible and rolled it all into one motor. Up to 35KW of peak power and monster performance. We have applied all of our extensive engineering know-how and experience as well as our own patented technology. take a look below at some of the features of the KO Moto RS Motor.
​
OR
WHAT ARE THE DIFFERENCES?
RS MOTOR
RATED RPM 5200 - LOWER KV WIND
HIGHEST QUALITY CHINA SOURCED MAGNETS
SILVER ANODIZED CASING AVAILABLE IN BLUE OR RED
52NM @ 60V
TOP SPEED 80MPH +
(TOP SPEED WILL DEPEND ON YOUR WHEEL SIZE, GEARING, RIDER WEIGHT AND OTHER FACTORS AND IS TO GIVE AN INDICATOR OF PEAK PERFORMANCE).
FACTORY SPEC
RATED RPM 6000 - HIGHER KV WIND
HIGHEST QUALITY MAGNETS IMPORTED FROM EUROPE
BLACK ANODIZED CASING WITH SPECIAL COLOUR COMBINATIONS
55NM @60V
TOP SPEED 90MPH +
(TOP SPEED WILL DEPEND ON YOUR WHEEL SIZE, GEARING, RIDER WEIGHT AND OTHER FACTORS AND IS TO GIVE AN INDICATOR OF PEAK PERFORMANCE).
LOOKING FOR A GREAT QUALITY CONTROLLER THAT IS NOT OVER PRICED FOR YOUR SUR-RON OR TALARIA. THEN LOOK NO FURTHER THAN THE KO NANO.
FULL CNC HEATSINK
210A DC
520A PHASE CURRENT
FREE TUNING SUPPORT
FREE SOFTWARE
FREE UPDATES
FREE UPDATES
1) TRUE FACTORY FIT
This motor will fit to your Sur-Ron using the stock mounting positions on your bike. It will also connect directly to our controller in the simplest way possible. This means that you don't have to do any additional procedures to fit, no extra cables, no extending phase wires and no extra messing around with brackets to get it on your bike. It will fit just like a stock controller motor, because it was made to fit this way.
2) PROPER WATERPOOFING
Unlike the standard Sur-Ron motor our motor is IP69 waterproof certified giving you peace of mind to tackling any terrain in any weather, without letting you down.
​
3) FULL CNC CONSTRUCTION
Our motor is made entirely from a billet of 7075 aluminium this not only enhances the look and quality feel of the motor but it significantly improves heat dissipation over a cast casing. This gives maximum durability, maximum heat dissipation and a motorcycle grade anodized finish. We have also extended the cooling fins of the casing to allow for more efficient and substantial cooling properties.
4) LARGER STATOR VOLUME
BY making changes to the placement of the sensor housing we have managed to cram in a much larger stator volume into the same casing size as the original Sur-Ron Motor. A bigger stator volume means more power. The RS motor features a copper packed hand wound 160mm x 53mm stator. This allows the motor to put down some serious power and helps with thermal management.
UNMACTHED PERFORMANCE FOR YOUR SUR-RON KO MOTO REDEFINES WHAT IS POSSIBLE
7075 CNC ALUMINIUM CONSTRUCTION
MOTOR WEIGHT (INCLUDING WIRES) 10KG APPROX FOR BOTH RS AND F-SPEC
MOTOR SPECIFICATIONS
​​
-
INTERNAL MAGNET MOTOR (IPM) KO DESIGNED MANUFACTURED ROTOR / STATOR.
-
STATOR DIMENSIONS - 160mm X 53mm.
-
WORKING VOLTAGE - 48V-100V.
-
COLD ROLLED SAE 1045 STEEL SHAFT
-
CUSTOM KO DESIGNED AND PATENTED ROTOR AND HEAT SINK DESIGN ALLOWS HEATSOAK DISSIPATION ON THE ENDS OF THE STATOR.
-
KO DESIGNED AND PATENTED INTERNALS PRESSURE EQUALIZATION SYSTEM COMPATIBLE.
-
KO DESIGNED AND PATENTED CRYO COLD AIR INJECTION SYSTEM COMPATIBLE.
-
KO DESIGNED AND MANUFACTURED CRYO ROTOR/ STATOR ANTI CORROSION COATING.
-
INDUSTRY LEADING SKF BEARING AND SEALS (OR EQUIVALENT) FOR THE LOWEST ROLLING RESISTANCE AND EFFICIENCY.
-
-
JAPANESE SOURCED 0.35 NIPPON STEEL STATOR / ROTOR LAMINATED.
-
INDUSTRY LEADING 1.5mm AIR GAP.
-
INDUSTRY LEADING 150°C / 302F SH50 NEO MAGNETS.
-
HAND WOUND 220°C HIGH TEMP COPPER WINDINGS.
-
CUSTOM WATERPROOF DESIGNED (IP69) AND MANUFACTURED HALL SENSOR WITH 6 MONTH REPLACEMENT WARRANTY AGAINST WATER / MOISTURE DAMAGE.