**Shipping Lead time approxmiately 2-3 weeks**
Designed from the ground up to give unmatched torque and power, without suffering from all of the issues that plague the stock sur-ron motor & controller offering.
 
Easy to fit
Both the motor and controller are designed to be a plug and play option in the Sur-Ron and are easy to fit, using the same cabling and also the same default Sur-Ron display unit. Gone is the need to upgrade your display unit and run additional extra cabling across your bike. 
 
Controller Specifications
Colour - Black 
WORKING VOLTAGE - 60-72V Nominal (max voltage 84V)
MAX PHASE CURRENT 450A
MAX CURRENT 210A
MAXIMUM POWER - 17000W
OPERATING TERMAPERATURE - -25—80℃
INGRESS PROTECTION - IP67
MAXIMUM EFFICIENCY - ＞95%
 
Motor Specifications
MOTOR CASING FEATURES
Colour - Red and Silver,  Blue and Silver
DIRECT DROP IN REPLACEMENT FOR SUR-RON AND SEGWAY X260.
MOTORWEIGHT (INCLUDING WIRES) - 10KG,
MOTORCYCLE GRADE ANODIZED FINISH FOR MAXIMUM DURABILITY AND HEAT DISPERSION (NOT POWER COATED).
7075 AIRCRAFT GRADE BILLET MACHINED END CAPS AND SENSOR CAP.
STAINLESS STEEL WATER PROOF PHASE AND SENSOR WIRE GLANDS.
​
INTERNAL MOTOR FEATURES​
INTERNAL MAGNET MOTOR (IPM) KO DESIGNED MANUFACTURED ROTOR / STATOR.
STATOR DIMENSIONS - 160mm X 53mm.
WORKING VOLTAGE - 60V-100V.
COLD ROLLED SAE 1045 STEEL SHAFT
CUSTOM KO DESIGNED AND PATENTED ROTOR AND HEAT SINK DESIGN ALLOWS HEATSOAK DISSIPATION ON THE ENDS OF THE STATOR.
KO DESIGNED AND PATENTED INTERNALS PRESSURE EQUALIZATION SYSTEM COMPATIBLE.
KO DESIGNED AND PATENTED CRYO COLD AIR INJECTION SYSTEM COMPATIBLE.
KO DESIGNED AND MANUFACTURED CRYO ROTOR/ STATOR ANTI CORROSION COATING.
INDUSTRY LEADING SKF BEARING AND SEALS FOR THE LOWEST ROLLING RESISTANCE AND EFFICIENCY.
JAPANESE SOOURCED 0.35 NIPPON STEEL STATOR / ROTOR LAMINATED.
INDUSTRY LEADING 1.5mm AIR GAP.
INDUSTRY LEADING 150°C / 302F SH50 NEO MAGNETS.
HAND WOUND 220°C HIGH TEMP COPPER WINDINGS.
​
MOTOR OPERATING SPECIFICATION
PEAK POWER - 35KW
MAX TORQUE @60V - 52NM
MAX STABLE ROTOR RPM - 12,000RPM
MAX EFFICIENCY 97%
 
**WARNING* Please note when installing your controller you must use the provided bolts to prevent damage. Using hex bolts can result to too much torque being applied to the connectors which can be damaged or even break off if too much force is applied. We provide Philips heads bolts with the controller to prevent this.